FYJ 40 TF
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
Dimensions
| d | 40 | mm | |
| d1 | ≈ | 51.8 | mm |
| A | 36 | mm | |
| A1 | 14 | mm | |
| A3 | 3.2 | mm | |
| B | 49.2 | mm | |
| B4 | 8 | mm | |
| Da | 115.9 | mm | |
| Db1 | 99 | mm | |
| Db2 | 107 | mm | |
| J | 102 | mm | |
| L | 130 | mm | |
| N | 16 | mm | |
| s1 | 30.2 | mm | |
| T | 51.2 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 23 | mm | |
| Dowel pins | |||
| J6 | 118 | mm | |
| J7 | 34 | mm | |
| N4 | 4 | mm | |
Calculation data
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
with shaft tolerance h6
Mass
| Mass bearing unit | 1.7 | kg |
Mounting information
| Thread grub screw | G2 | M8x1 | ||
| Hexagonal key size for grub screw | N | 4 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
Included products
| Housing | ||||
| Bearing | ||||
For additional information about the meaning and limitations of the product data, refer to Ball bearing flanged units and Ball bearing units.
ISO*: Slight deviation from ISO standard. For details, refer to Ball bearing unit data.
